Services
Have Questions?
Custom options
Select boot /rear sleeves of different sizes based on the outer diameter of the sheath you need to match. For example, if the outer diameter of the sheath is 3.0mm, it can be selected Use the connectors we have equipped with 3.0 tail sleeves or 3.0 rear sleeves. Tail sleeve connector, connection method is crimping type with clamp tube. With rear sleeve connector
The connection method is dispensing type.
Select different ferrule hole diameters based on the diameter of the optical fiber you need to use. If the optical fiber used for stripping the cladding needs to be stripped, the aperture should be as follows
Calculate based on the size after peeling. For example: The optical fiber is 200/220/320 optical fiber, and after stripping, it becomes 200/220. Then the core hole diameter selected is
220 μ m is sufficient.
Our dust caps are available in both chained and non-chained versions. The advantage of the chained version is that the dust caps are less likely to be lost and can be directly fitted onto optical fiber sheaths or plugs.
Moreover, if the dust cap with a chain gets dirty or broken, it can also be taken off and replaced.
Our standard regular models are mostly made of stainless steel for the core and copper for the main body. According to the environmental requirements of the application, if it is used in a high-temperature environment, then The all-stainless steel style should be used.
